Grupo de Ingeniería Química y Ambiental

Juan José Espada es Ingeniero Químico por la Universidad Complutense de Madrid (1999) y Doctor Ingeniero Químico por la Universidad Rey Juan Carlos (2005). Su trayectoria docente se ha desarrollado íntegramente en la Universidad Rey Juan Carlos bajo las figuras de Ayudante de Escuela Universitaria (2000-2005), Profesor Ayudante Doctor (2005-2008) ambas en el Departamento de Tecnología Química y Ambiental y Profesor Contratado Doctor (actualmente) en el Departamento de Tecnología Química y Energética. Con respecto a su trayectoria investigadora, además de la tesis doctoral y la investigación post-doctoral realizadas en la Universidad Rey Juan Carlos, ha sido investigador visitante en la Universidade de Aveiro-Departamento de Química (2006, Aveiro, Portugal) bajo la supervisión del profesor João A. P. Coutinho y en la Université de Pau et des Pays de L´Adour-Laboratoire des Fluides Complexes bajo la supervisión de los profesores Jean-Luc Daridon y Jérôme Pauly. Sus líneas de investigación se centran en el desarrollo de métodos de caracterización de fracciones petrolíferas así como de modelos de simulación de procesos de refino relacionados con las bases lubricantes. Actualmente desarrolla su investigación en el campo de aseguramiento de flujo de crudos de petróleo en aspectos relacionados con la precipitación de parafinas. Además, participa en estudios de Análisis de Ciclo de Vida de procesos para la producción de hidrógeno.












Biodiesel and biogas production from Isochrysis galbana using dry and wet lipid extraction: A biorefinery approach

Sánchez-Bayo, A.; López-Chicarro, D.; Morales, V.; Espada, J. J. Puyol, D.; Martínez, F.; Astals, S.; Vicente, G.; Bautista, L. F.; Rodríguez, R.


Mild hydrothermal pretreatment of microalgae for the production of biocrude with a low N and O content

Montero-Hidalgo, M.; Espada, J. J.; Rodríguez, R.; Morales, V.; Bautista, L. F.; Vicente, G.


Environmental and techno-economic evaluation of B-carotene production from Dunaliella salina. A biorefinery approach

Espada, J. J.; Pérez-Antolín, D.; Vicente, G.; Bautista, L. F.; Morales, V.; Rodríguez, R.


Life cycle assessment and techno-economic evaluation of alternatives for the treatment of wastewater in a chrome-plating industry

Rodríguez, R.; Espada, J. J.; Gallardo, M.; Molina, R.; López-Muñoz, M. J.


Prediction of density and refractive index in furfuralþlubricating oil systems

Espada, J. J.; Rodríguez, R.


Comparative life cycle assessment (LCA) study of heterogeneous and homogenous Fenton processes for the treatment of pharmaceutical wastewater

Rodríguez, R.; Espada, J. J.; Pariente, M. I.; Melero, J. A.; Martínez, J. A.; Molina, R.


Evaluation of different methodologies to determine the n-paraffin distribution of petroleum fractions

Espada, J. J.; Fernández, S.; Velasco, L.; Coto, B.


Evaluation of different methodologies to determine the molecular weight of petroleum fractions

Espada, J. J.; Almendros, C.; Coto, B.


A New DSC-Based Method to Determine the Wax Porosity of Mixtures Precipitated from Crude Oils

Coto, B.; Martos, C. ; Espada, J. J.; Robustillo, M.D.; Merino-García, D.; Peña, J. L.


Assessment and improvement of n-Paraffin distribution obtained by HTGC to predict accurately crude oil cold properties

Coto, B.; Coutinho, J. A. P.; Martos, C. ; Robustillo, M.D.; Espada, J. J.; Peña, J. L.


Study of New Methods To Obtain the n-Paraffin Distribution of Crude Oils and Its Application to Flow Assurance

Coto, B.; Martos, C. ; Espada, J. J.; Robustillo, M.D.; Merino-García, D.; Peña, J. L.


Analysis of wax precipitation from crude oils by means of DSC: iterative procedure considering solid-liquid equilibrium equations.

Coto, B.; Martos, C.; Espada, J.J.; Robustillo, M.D.; Peña, J.L.

  • Fuel, 2010, 89 (5), 1087-1094. (2010)

Characterization of Brazilian crude oil samples to improve the prediction of wax precipitation in flow assurance problems

Martos, C. ; Coto, B.; Espada, J. J.; Robustillo, M.D.; Peña, J. L.; Merino, D.

  • Energy Fuels, 2010, 24 (4), 2221–2226. (2010)

Structural characterization of fuels obtained by olefin oligomerization

Rodríguez, R.; Espada Sanjurjo, J. J.; Coto, B


Assessment of a thermodynamic model to describe wax precipitation in flow assurance problems

Coto, B.; Martos, C.; Espada, J. J.; Robustillo, M. D.; Peña, J. L.; Gómez, S.


Simulation of pilot-plant extraction experiments to reduce the aromatic content from lubricating oils

Espada, J. J.; Coto, B.; Moreno, J. M.; van Grieken, R.


Experimental Determination and Characterization of Wax Fractions Precipitated as a Function of Temperature.

Martos, C.; Coto, B.; Espada, J. J.; Robustillo, M. D.; Gómez, S.; Peña, J. L.

  • Energy & Fuels, 22, 708–714 (2008)

Application of a generalized model to the estimation of physical properties and description of the aromatic extraction from a highly paraffinic lubricating oil

van Grieken, R.; Coto, B.; Peña, J. L.; Espada, J. J.


A new method for the determination of wax precipitation from non-diluted crude oils by fractional precipitation

Coto, B.; Martos, C.; Peña, J. L.; Espada, J. J.; Robustillo, M. D.


Liquid-liquid equilibrium in the systems furfural+light lubricating oils using UNIFAC

Espada, J. J.; Coto, B.; Peña, J. L.


A model to predict physical properties for light lubricating oils and its application to the extraction process by furfural

Coto, B.; van Grieken, R.; Peña, J. L.; Espada, J. J.


A generalized model to predict the liquid-liquid equilibrium in the systems furfural+lubricating oils

Coto, B.; van Grieken, R.; Peña, J. L.; Espada, J. J.


Prediction of Liquid-Liquid Equilibrium in the System Furfural + Heavy Neutral Distillate Lubricating Oil

van Grieken, R.; Coto, B.; Romero, E.; Espada, J. J.

  • Industrial & Engineering Chemistry Research, 44 (21) (2005)

Crystallization mechanism of Al-TS-1 synthesised from amorphous wetness-impregnated Al2O3-TiO2-SiO2 xerogels: Role of aluminium species

Melero, J.A.; van Grieken, R.; Serrano, D.P.; Espada, J.J.

  • Journal of Materials Chemistry. 11 1519-1525 (2001)

Subir